What is Exposure Triangle
ISO, Aperture and Shutter.
Shutter Speed: The amount of time shutter is open.
Here you can see slower shutter like 1/4s speed will blur the moving subject but it allows more light to reach the sensor. Similar, Fast shutter like 1/8000s speed will take the sharp picture but due to fast shutter less light reaches to sensor.
Aperture : This is the size of lens opening which control amount of light reaches sensor.
A small aperture (big f number like f/32) will take the super sharp picture of subject including background and foreground. But due to small aperture it allows less light to reach sensor. On the other hand big aperture (small f number like f/1.4) will blur the background while foreground would be super sharp.
ISO : This Measures the camera’s sensor sensitivity to light.
Here less ISO like 100 will take sharp picture with no noise. Less ISO means sensor will be less sensitive to light. While the high ISO like 25600 will introduce too much grain in picture and sensor would be very sensitive to light.
Bringing all this three together:
With the help of this small story, I am trying to explain the scenario and how/when to control all three different aspects of Exposure Triangle …….
I was on a trip to my favorite place on the planet to take pictures. I was being informed that the triple-horned rhino in the park are extremely rare , so I worked hard that week to capture images of the last few rhino left in that area of the park. Around 9AM on a cloudy day, I found a small group of triple-horned rhino and started photographing them with a long 300mm Tamron lens. The early hour and clouded sky made the situation quite dark for shooting. To compensate this darkness, I had to keep my camera setting with maximum aperture, my lens had a maximum aperture size of f/4. So I set my aperture to f/4 to gather as much light as possible. This will also impact the depth-of field (blur effect) to blur out the stones behind the triple-horned rhino. This makes the perfect Rhino shot with subject shapely in focus and everything else is beautifully blurred.
Next, I had to set my shutter speed. I wanted to capture action in the photo, So that’s why I needed shutter to open for a fraction of second so that images should not come out blurred, so I set my camera to 1/500th of a second. I knew that fast shutter speed would prevent any motion blur from the rhino running on a grass side. And then, I fired my shutter and picture got displayed on LCD. Sadly 🙁 picture was way too dark and I could hardly see Rohino on my LCD. Here I couldn’t compromise my shutter speed or aperture, so I knew I needed to use the third player in the exposure triangle–the ISO.
I started played around with ISO, when we increase ISO, sensor becomes more sensitive to light and it gathers more light from environment than it generally does with low ISO, but with too much ISO it will also show graininess in picture. So I had to manage something in between so that picture should be bright enough with less noise. And finally found that if I increased it to ISO 640, it made the picture bright enough without making it overly grainy.
Yehhhhh ! This combination of shutter speed, aperture, and ISO worked out perfectly.
Aperture : F/4.0
Shutter Speed : 1/500th of second
ISO : 640
Now you can see why we need to control shutter, aperture, AND ISO to make photograph perfectly exposed to light. It shouldn’t be blown out with too much light or underexposed with less light.
Do let me know your doubts.. I will surely answer those.